Open as PDF
Setting up the remote control
WARNING: Keep the remote control battery away from children. /t may cause a fire or
chemical bum ff mishandled. Do not recharge, disassemble, heat above 212°F (100°C),
or indnerate. Dispose of used battery prompdy Rep/ace only with a battery of the correct
type and model number.
Your remote control may be one of two types (Figure 4A or 4B). Each is identified by the way
the battery compartment unlocks to install or replace the battery.
1. Place the remote control face down on a flat surface.
2. If your remote has a slot on the back (Figure 4A), follow step A. Otherwise, follow step B
and refer to Figure 4B:
A. Insert the tip of a ballpoint pen into the slot. Push to the side as shown and hold. Slide
the battery compartment open with your finger.
B. Using your finger, push the tab lock to the side as shown and hold. Slide the battery
Figure 4A or B