Filter
Top Products
Using the CD player
Lift the CD door (as shown). Place the CD, label-side up, on the spindle in the CD well. Gently
lower the door more than halfway, until it begins to close by itself. Or continue to close it
manually if you prefer.
Figure 11
Setting up a CD
Function
/
To turn on/off - Press On/Off once to turn on or off. The system turns
on to the last source played. Or, press CD Play _ II to turn on the CD
player. In CD mode, the CD begins to play as soon as you load a disc
and close the CD door.
To play or pause the CD - Press CD Play _" || to play the CD. The
play/pause I_lights. While playing, press CD Play 1_|| to pause the CD.
The play/pause I_flashes. After 10 minutes paused, the system shuts
off.
To step the CD - Press CD Stop II. The display briefly shows the
disc's total playing time. The number of tracks also shows.
To select a track - In CD mode, press either Track/Tune <_ or _>
until the desired track is selected.
Pressing Track/Tune <q skips back to the beginning of the current track. A
second press within 2 seconds skips to the beginning of the previous track.
Pressing Track/Tune <:1at the beginning of the disc skips to the last track.
Pressing Track/Tune _> at the end of the disc skips to track 1.
To scan through a CD while playing - Press and hold
Track/Tune <_ or _> to scan through a track. Release the button to
stop. The display shows the track and playing time. After scanning,
wait 2 seconds to return to track selection.
Track/Tune
Track, Tune
m
To scan through a CD while paused - Press and hold Track/Tune
or _ to scan to the desired location. The play/pause ll_flashes.
Press CD Play I_ || to start at the selected position. Or, after scanning,
wait 2 seconds to return to track selection.
Tn,_ck/T_une
To scan through a CD while stopped - Press Track/Tune <:1or _ _,_ok_,.r,o
once to change from total tracks display to track 1. Press and hold
Track/Tune <q or _ to scan to the desired location. Press CD Play I_ | |
to start at the selected position. Or, after scanning, wait 2 seconds to
return to track selection.
=
18