Filter
Top Products
24 - Utility Mode
D5000
When the FOOT SW FUNCTION is set to PROGRAM, the D5000 switches to the next program each
time you press the footswitch. When the last program in the range (TO) is the current program,
when you press the footswitch again, it will select the first program again.
For example, if you set the FROM parameter to 70 and the TO parameter to 75, each time you press
the footswitch the program changes to the next one in order:
If you set the FROM parameter to 75 and the TO parameter to 70, the change is in reverse order:
MIDI SET-UP
The D5000 has seven MIDI program change tables set in banks "A" to "G". Each table contains a list
of MIDI program numbers and the corresponding D5000 effect program. You can customize each
table for your requirements.
MIDI SET-UP parameters
Press the [ UTILITY ] key to select the MIDI SETUP command.
Use the [ ^ ] and [ % ] CURSOR keys to move through the various
parameters. Modify the selected parameter by rotating the DATA ENTRY
encoder.
CH (OMNI, 1 ~ 16, OFF) Select the MIDI channel for both input and output.
If you select OMNI (the default), the D5000 will receive MIDI
events on all 16 channels and transmit on channel 1.
If you select one of the channels from 1 to 16, the D5000 receives
and transmits on the selected channel.
Selecting OFF disables MIDI reception and transmission.
BANK (A ~ G) Select a program change table.
PGM (1 ~ 128) Select the MIDI program number. As you change the MIDI
program number by rotating the DATA ENTRY encoder, notice
how the D5000 program number changes correspondingly.
D5000 (1 ~ 00, ---) Select the D5000 program number. You can assign any D5000
program number to the current MIDI program number. When the
D5000 receives a MIDI Program Change message with that MIDI
program number, it will switch to the corresponding D5000
program number. When "---" is selected, the D5000 will ignore
any transmissions for the corresponding MIDI program number.
NOTE
The D5000 has seven program change tables. The tables come preset from the factory with MIDI
program numbers 1 to 100 directly mapped to the D5000 program numbers
1 to 00 (100) and MIDI
program numbers 101 to 128 mapped to the D5000 program numbers
1 to 28.
70 71 72 73 74 75
75 74 73 72 71 70