Filter
Top Products
Parameter Edit Mode - 21
D5000
The sample and hold function is controlled by the [ TRIGGER ] key or by a footswitch connected to
the TRIGGER Footswitch Jack.
As you press the [ TRIGGER ] key or step on the footswitch, the LCD will display the following
sequence of messages:
Page 2: Setting the title
STOP Indicates that the S&H function is ready to begin recording. Press
the [ TRIGGER ] key or step on the footswitch to begin recording.
RECORD The D5000 is recording a sample. If the recording time has
exceeded the maximum, the earliest sampled data will be
overwritten by the latest sampled data. While it is recording, the
D5000 will not output any "WET" sound.
Press the [ TRIGGER ] key or step on the footswitch to stop
recording. The D5000 will start playback of the sampled data.
PLAY The sampled data will playback in a continuous loop. Press the
[ TRIGGER ] key or step on the footswitch to stop playback.
Press the [ DELAY ] key again to select the second display page.
Use the [ < ] and [ > ] CURSOR keys to move along the line of text. Change
the letter under the cursor by rotating the DATA ENTRY encoder. See
page 12 for the list of available characters.
[TRIGGER] key
or
Footswitch
[TRIGGER] key
or
Footswitch
[TRIGGER] key
or
Footswitch
STOP RECORD PLAYBACK (Loop) STOP