Filter
Top Products
Utility Mode - 23
D5000
PARAMETER DISPLAY
FOOT SW (footswitch) FUNCTION
FOOT SW FUNCTION parameters
Press the [ UTILITY ] key to select the PARAMETER DISPLAY command.
Change the MODE from "NORMAL" to "DETAIL(AUTO)" or
"DETAIL(HOLD)" by rotating the DATA ENTRY encoder.
When the PARAMETER DISPLAY is set to "DETAIL(AUTO)" or "DETAIL(HOLD)", the parameters
are displayed in a large, easy-to-read font in a pop-up sub-window. A bar graph is also displayed,
giving you a visual indication of the parameter’s status.
If the value is set to "DETAIL(AUTO)", the pop-up sub-window will be
displayed on the LCD as long as you are adjusting the parameter. It will
disappear if you press one of the [ < ] or [ > ] CURSOR buttons, or after 3
seconds have passed without further rotation of the DATA ENTRY
encoder.
If it is set to "DETAIL(HOLD)", the pop-up sub-window will remain
displayed until you press one of the [ < ] , [ ^ ] , [ > ] , or [ % ] CURSOR
buttons, or select another function.
The advantage of this feature will become apparent the first time you work on an effect in a dimly-
lit recording studio or concert hall.
Press the [ UTILITY ] key to select the FOOT SW (footswitch) FUNCTION
command.
Use the [ ^ ] and [ % ] CURSOR keys to move through the various
parameters. Modify the selected parameter by rotating the DATA ENTRY
encoder.
BYP/PGM (PROGRAM/BYPASS) Sets the function of the BYPASS - PROGRAM INC/DEC
footswitch jack.
BYPASS The footswitch duplicates the function of the
[ BYPASS ] key.
PROGRAM The footswitch allows you to select between a pre-
determined range of program numbers.
FROM (1 ~ 00) When PROGRAM is selected, use this item to set the starting
program number. If BYPASS is selected, this parameter does not
appear.
TO (1 ~ 00) When PROGRAM is selected, use this item to set the last program
number. If BYPASS is selected, this parameter does not appear.