Filter
Top Products
Parameter Edit Mode - 19
D5000
Playback loop
You can set a loop point within the sample. This sets the start point for repeats after the first
playback.
Page 3: Setting the pitch and MIDI note number
FREEZE PITCH parameters
Press the [ DELAY ] key again to select the third page of the FREEZE
program.
Use the [ ^ ] and [ % ] CURSOR keys to move through the various
parameters. Modify the selected parameter by rotating the DATA ENTRY
encoder.
PITCH (↓↓ Oct ~ Unison ~
↑↑ Oct)
Set the pitch for playback. The D5000 can adjust the pitch by plus
or minus two octaves. When you change the pitch, the playback
time of the sample is also changed. As the pitch drops, the
playback time increases, and when the pitch is increased, the
playback time is shortened.
START
END
Playback
Sample
START
END
Playback
Sample
* Sound is reversed
START
END
Playback
START
END
Playback
* Sound is reversed
Playback
Sample
START
END
LOOP
* Sound is reversed
START
END
Playback
Sample
LOOP