Filter
Top Products
36 Chapter 5—Recording
CDR1000—Owner’s Manual
Inserting a Mute at the End of a Track
The following illustration shows the procedure for inserting a mute at the end of a
track.
1 Start recording, as explained on page 29.
See page 40 for information on inserting a mute with One-track Sync Recording.
2 While recording, press the [REC MUTE] button.
Rec Mute Standby mode is engaged and the REC MUTE indicator flashes.
3 Press the [PAUSE] button to engage Record Standby mode, or press the
[STOP] button or footswitch to stop recording.
A two-second silent section is inserted and then the REC MUTE indicator goes out. If
the Fade Out function is set, the mute is inserted after the fade out.
2-second
mute
Fade
out
(if set)
Recording
(If the STOP] button or
footswitch was pressed,
recording stops instead)
Record
Standby
mode
PAUSE
Start recording
as normal
Rec Mute
Standby
mode
REC
MUTE