Filter
Top Products
8 Chapter 2—Touring the CDR1000
CDR1000—Owner’s Manual
Display
A TRACK counter
The track counter displays the selected track number.
B INDEX counter
The index counter displays the selected index number.
C ELAPSE, REMAIN & TOTAL indicators
These indicators show the selected time display mode. See “Setting the Time Display”
on page 19 for more information.
D Time counter
These four digits display the playback and recording time in minutes and seconds.
E Disk type indicator
These indicators show the type and status of the loaded disc. See “Disc Type & Status”
on page 18 for more information.
F PLAY ( ) indicator
This indicator lights up during playback and recording, and flashes during finalization,
erasure, and PMA writing.
G ANALOG, AES/EBU & COAX indicators
These indicators show the selected input source. See “Selecting the Input Source” on
page 25 for more information.
H LOCK indicator
This indicator shows whether or not the CDR1000 is locked to the selected digital input
source. See “Selecting the Input Source” on page 25 for more information.
I SRC indicator
The SRC (sampling rate converter) indicator lights up when the CDR1000’s built-in
sampling rate converter is active during recording. See “Setting the Sampling Rate Con-
verter” on page 26 for more information.
J COPY indicators
These indicators show the Copy Bit setting. See “Setting the Copy Bit” on page 28 for
more information.
CLIP
SYNC-REC
REPEAT A B
–60dB
L
R
–50 –40 –32 –24 –18 –14 –12 –10 –8 –6
SMINDEXTRACK
ELAPSE
REMAIN
TOTAL
–4 –3 –2 –1
1 ALL
1 ALL
REC COPY10
LOCKCD-RW
ANALOG
SRC
AES/EBU COAX
88 88 88 88
CDR1000
1 2 3 4 6
NM
7
K
9
8
J
L
5
P
O