Filter
Top Products
12 Chapter 2—Touring the CDR1000
CDR1000—Owner’s Manual
F PARALLEL port
This 9-pin D-sub connector is a general purpose interface that provides access to vari-
ous CDR1000 functions. By using custom made switches and cables, it can be used for
simultaneous control of multiple CDR1000s in multiple disc recording, or disc dupli-
cation systems. See “Using the Parallel Port” on page 51 for more information.
G DIGITAL COAXIAL OUT connector
This phono jack outputs playback and monitor signals as S/PDIF format digital audio.
H DIGITAL COAXIAL IN connector
This phono jack is used to connect S/PDIF format digital audio sources. See “Selecting
the Input Source” on page 25 for more information.
I WORD CLOCK IN connector
This BNC connector is used to connect an external wordclock source, which can be
used to lock the AES/EBU OUT during playback. See “Selecting the AES/EBU OUT
Playback Clock” on page 46 for more information.
J DIGITAL AES/EBU OUT connector
This male XLR-3-32 type connector outputs playback and monitor signals as AES/EBU
format digital audio.
K DIGITAL AES/EBU IN connector
This female XLR-3-31 type connector is used to connect AES/EBU format digital audio
sources. See “Selecting the Input Source” on page 25 for more information.