Filter
Top Products
24 Chapter 4—Playback
CDR1000—Owner’s Manual
Searching
You can search the program material at high speed using the SEARCH [ ] and [ ]
buttons during playback or playback pause.
1 Press and hold the backward SEARCH [ ] button to search backwards.
The CDR1000 searches backwards from the current position and the PLAY indicators
go out. If the top of the current track is reached, searching continues into the previous
track. If the top of the first track is reached, searching stops.
When the SEARCH [ ] button is released, the previous mode—playback or playback
pause—is resumed and the relevant indicators light up.
2 Press and hold the forward SEARCH [] button to search forwards.
The CDR1000 searches forwards from the current position and the PLAY indicators go
out. If the end of the current track is reached, searching continues into the next track.
If the end of the last track is reached, searching stops.
While searching is in progress, playback signals are output by the ANALOG OUT and
PHONES only, the AES/EBU OUT and COAXIAL OUT are muted.
Using Repeat Playback
The CDR1000 provides three types of repeat playback: One-track Repeat, in which the
current track plays repeatedly, All-track Repeat, which plays all tracks repeatedly, and
A-B Repeat, which repeatedly plays the region between the specified A and B points.
One-track Repeat Playback
1 Press the [REPEAT] button.
One-track Repeat playback starts and “REPEAT 1” appears on the display.
2 Press the [REPEAT] button twice to cancel One-track Repeat playback.
Normal playback resumes and “REPEAT 1” disappears from the display.
All-track Repeat Playback
1 Press the [REPEAT] button twice.
All-track Repeat playback starts and “REPEAT ALL” appears on the display.
2 Press the [REPEAT] button to cancel All-track Repeat playback.
Normal playback resumes and “REPEAT ALL” disappears from the display.
A-B Repeat Playback
1 Press the [A-B] button to set the A point.
The A point is set and “REPEAT A” appears on the display.
The A and B points can be in the same track or in different tracks.
2 Press the [A-B] button again to set the B point.
Playback repeats between the A and B points and “REPEAT AB” appears on the display.
3 Press the [A-B] button again to cancel A-B Repeat playback.
Normal playback resumes and “REPEAT AB” disappears from the display.