33
Changing sound field and quality
RQT5471
1
A
1
2
3
U
PRO LOGIC
OFF/ON
∂ VOLUME µ
1
ENTER
RETURN
3D AI EQ/
M.EQ BAND
AV EFFECT
H
ANGLE
SLEEP
MARKER
TOP MENU
SUBTITLE
123
456
7890
j/-/--
DISC
PLAY MODE
CANCEL
AUDIO
U
PRO LOGIC
CH SELECT
TEST
DIGITAL
S.WOOFER
SUPER SRND
⁄/g¤»
∂VOLUME µ
VCR(EXT)/
VDP(AUX)
TAPE/
DECK 1/2
TUNER/
BAND
DVD
SLOW/SEARCH
MUTING
SKIP
SHIFT
MENU
EQ
SETUP
DISPLAY
MIX 2CH
1
2
2
1
TEST
SHIFT
3
Enjoying surround sound
DOLBY PRO LOGIC
1 Press [ëPRO LOGIC, OFF/ON].
The indicator turns green.
2 Play a Dolby Surround source.
To cancel
Press [ëPRO LOGIC, OFF/ON] so the indicator goes out.
Note
Turn Dolby Pro Logic off when playing a DVD recorded with 5.1-
channel Dolby Digital. The surround effects will not be reproduced
correctly if this is left on.
»
A
Speaker level adjustments
Remote control only
If the level of the speakers appears to be different while listening to a
source, adjust the levels of the speakers to the same apparent level.
1 Press [SHIFT] i [TEST] to output a test signal.
A test signal is output from the speakers in the following order.
Lch: Front left speaker
Cch: Center speaker
Rch: Front right speaker
Sch: Surround speakers
2 Press [VOLUME (j or i)] to set the volume level of the front
speakers normally used for enjoying the source.
3 While the speaker to be adjusted is outputting a signal
Press [3] (to increase the level) or [4] (to decrease the level).
The level of the speaker changes.
Repeat step 3 as desired.
To stop the test signal
Press [SHIFT] i [TEST] again.
To adjust the levels during play
1 Press [CH SELECT] to select the speaker.
Each time you press the button:
Lch>Cch>Rch>Sch
^-----------------------------------}
2 Press [3] or [4] to adjust the level.
Repeat steps 1 and 2 as desired.