27
Basic operations
RQT5471
B
A
F, G
GF
GF
DECK 1/2
Cassette tapes
»
A
Fast-forwarding and rewinding
Press [6] or [5] while the tape is
stopped.
For your reference:
³Each deck’s play direction is stored in the system’s memory.
³You can fast-forward or rewind the tape while you are playing or
recording a tape in the other deck. Press [DECK 1/2] to switch to the
non-playing deck, and then press [6] or [5]. After the above
operation, be sure to press [DECK 1/2] to select the other deck in
which you are playing a tape.
»
B
Tape program sensor (TPS)
TPS finds the beginning of a track and resumes play from there.
Press [6] or [5] during play.
Tape direction rewind fast-forward
!65
"56
Note
TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent sections within tracks.
Dolby noise reduction
Dolby NR reduces “hissing” when playing tapes. It increases the high
frequency region when recording and then reduces it during play.
Use the same system during play and recording. This unit has Dolby
B NR which reduces noise to a third.
Prerecorded cassettes and equipment marked “ë” use Dolby B NR.
Tape direction backward forward
!65
"56
Dolby noise reduction manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.