Filter
Top Products
Advanced Operations
En-49
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign “IN2” to
the “BD/DVD” input selector.
Here are the default assignments.
■ BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD,
EXTRA1, EXTRA2
`IN1, IN2:
Select the input to which the component has been
connected.
`-----:
Output composite video sources from the HDMI
output. The upconverted output from HDMI depends
on the assignment of “Composite Video Input”.
Tip
•“EXTRA1” and “EXTRA2” can be selected as input sources in
“Input” of “Quick Setup” (➔ page 43).
Composite Video Input
If you connect a component to a composite video input,
you must assign that input to an input selector.
If you switch the input to “TV/CD” with its default
assignment, the audio of “TV/CD” is output while the
video of the previously-selected source is displayed.
Here are the default assignments.
■ BD/DVD, CBL/SAT, GAME, PC, TV/CD, EXTRA1,
EXTRA2
`IN1, IN2, IN3, IN4:
Select the input to which the component has been
connected.
`-----:
The composite video is not input.
Tip
•“EXTRA1” and “EXTRA2” can be selected as input sources in
“Input” of “Quick Setup” (➔ page 43).
Note
• Using these inputs as audio-exclusive allows you to enjoy audio
and video from separate inputs. Refer to “Playing Audio and
Video from Separate Sources” for details (➔ page 31).
•“AUX” is fixed to the “-----” option.
•“USB” is used only for input from the front panel.
Digital Audio Input
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the OPTICAL IN 1, you
must assign “OPTICAL1” to the “TV/CD” input selector.
Here are the default assignments.
■ BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD,
EXTRA1, EXTRA2
`COAXIAL1, COAXIAL2, OPTICAL1,
OPTICAL2:
Select the input to which the component has been
connected.
`-----:
Select if the component is connected to an analog
audio input.
Tip
•“EXTRA1” and “EXTRA2” can be selected as input sources in
“Input” of “Quick Setup” (➔ page 43).
Note
• When an HDMI IN is assigned to an input selector in
“HDMI Input” (➔ page 48), the same HDMI IN will be set as
a priority in this assignment. In this case, if you want to use the
coaxial or optical audio input, make the appropriate selection in
the “Audio Selector” (➔ page 57).
• Supported sampling rates for PCM signals (stereo/mono) from a
digital input (optical and coaxial) are 32/44.1/48/88.2/96 kHz/16,
20, 24 bit.
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
GAME -----
PC -----
AUX - - - - -
TV/CD -----
EXTRA1 - - - - -
EXTRA2 - - - - -
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
GAME IN3
PC IN4
AUX ----- (Fixed)
TV/CD -----
EXTRA1 -----
EXTRA2 -----
Input selector Default assignment
BD/DVD COAXIAL1
CBL/SAT COAXIAL2
GAME OPTICAL1
PC -----
AUX -----
TV/CD OPTICAL2
EXTRA1 -----
EXTRA2 -----