Filter
Top Products
TASCAM BB-1000CD
43
10–Other useful functions
Backing up audio files
You can copy tracks on a CD into an SD card as audio files
and write files on an SD card on to a disc on the
COPY
screen.
Copying a CD onto an SD card
You can copy tracks on a CD onto an SD card. The tracks
are copied into the folder currently used. If you want to
copy them into another folder, select it on the
BROWSE
screen before copying (
∑ page 48 “Browsing an SD card”).
1. Press the MENU key to open the MENU screen.
2. Press the CURSOR [§/¶] key to select COPY and
press the
ENTER key.
3. Press the CURSOR [§/¶] key to select CD>SD and
press the
ENTER key.
4. Press the CURSOR [§/¶] key to select a file format to
record onto the SD card and press the
F2 key.
NOTE
You can select a format from WAV, MP3 (low), MP3 (normal), and
MP3 (high). The recording time is longer in the following order: WAV
< MP3 (high) < MP3 (normal) < MP3 (low). The longer the recording
time is, the worse the sound quality becomes.
5. Press the CURSOR [§/¶] key to select the target track
and press the
ENTER key.
The check mark is indicated by the selected track.
NOTE
Select the track again and press the ENTER key to uncheck it.
6. Repeat step 5 until all the target tracks are checked
and press the
F2 key.
The confirmation screen appears.
7. Press the F2 key to start copying.
The
COPY screen appears after copying is finished.
Writing files on an SD card onto a disc
1. Press the MENU key to open the MENU screen.
2. Press the CURSOR [§/¶] key to select COPY and
press the
ENTER key.
3. Press the CURSOR [§/¶] key to select SD>CD and
press
ENTER.
The
TRACK LIST screen appears and show the files
recorded on the SD card.
4. Press the CURSOR [§/¶] key to select the target file
and press the
ENTER key.
The check mark is indicated by the selected file.
NOTE
Select the fi le again and press the ENTER key to uncheck it.
5. Repeat step 4 until all the target files are checked and
press the F2 key.
6. Press the CURSOR [§/¶] key to select a file you want
to change the order of and press the
ENTER key.
The selected file is highlighted and you can change its
order in the disc.
7. Press the CURSOR [§/¶] key to move the file and
press the
ENTER key.
8. Repeat step 7 until you finish changing the order of
files and press the F2 key.