Filter
Top Products
TASCAM BB-1000CD
29
Turning the power on and off
Turning of the power
Slide the POWER switch on the left side of the unit to ON.
The Home screen will be displayed after the start-up screen
disappears.
Turning o the power
Slide the POWER switch to OFF.
CAUTION
Do not turn off the power while a media indicator (CD or SD) are
fl ashing (during writing data).
Setting the date and time
Set the date and time of the built-in clock. The time infor-
mation of the files made by this unit is based on the clock.
1. Press the MENU key to open the MENU screen.
2. Use the CURSOR [§/¶] key to select SETUP and
press the
ENTER key.
The SETUP screen appears.
3. Use the CURSOR [§/¶] key to select DATE/TIME and
press the
ENTER key.
The
DATE/TIME screen appears.
The clock stops while this screen is displayed.
Precautions concerning batteries
Small children may mistakenly swallow a lithium coin
•
battery and it is very dangerous. Keep the battery and
the remote control out of the reach of small children. In
the event a battery is swallowed, immediately consult a
physician.
Install batteries with matching the polarity correctly.
•
Do not charge the battery.
•
Do not heat or disassemble batteries. Do not put them in
•
fire or water.
Do not carry or store batteries together with small metal
•
objects. The batteries could short, causing leak, rupture
or other trouble.
Precautions using the remote control unit
Remove the batteries if you do not plan to use the
•
remote control for a long time (longer than a month).
If the battery fluid leaks, wipe away any fluid on the
•
battery case before inserting a new battery.
Using the remote control unit while other equipment
•
controllable with infrared ray is turned on may cause
misfunction of the equipment.
Aim the remote control unit at the remote sensor.
•
An obstacle may interfere operations through the remote
control unit.
STOP
Ô
RECORD
PLAY/READY
˚
ª
Â
º
¥/π
¯
Operating distance
Head-on to the sensor: 7 m
15° left/right from the sensor: 4 m
4–Preparation
Remote sensor