Filter
Top Products
18
TASCAM BB-1000CD
2–Quick start guide
Here introduces preparation of the unit and basic operations
from playback to recording.
Preparation
Powering the unit
You can use the supplied AC adapter or separately purchased
AA batteries
. Connect the AC adapter or install the batter-
ies before use.
Connecting the AC adapter
Connect the power cable to the AC adapter, the adapter to
the unit, then connect the power cable to the AC outlet.
The left side panel of the unit has a dent for holding the
cable of the AC adapter–the AC cord holder. Hook the
cord in to the clipping of the holder to prevent unexpected
disconnection of the cord.
CAUTION
DO NOT hook the AC cord in forcedly. It may damage the cord.•
Uninstall the batteries when using the supplied AC adapter to •
keep the battery life longer.
Installing the batteries
Take off the battery case cover and install separately pur-
chased eight AA batteries observing the
± and — marks on
the case.
NOTE
Batteries are not supplied with this product. It is recommended to
use Ni-MH or alkaline batteries.
Turning the power on and off
Turning on the power
Slide the POWER switch on the left side of the unit to ON.
The Home screen will be displayed after the start-up screen
disappears.
Turning o the power
Slide the POWER switch to OFF.
CAUTION
Do not turn off the power while the CD or SD indicator is fl ashing
(during writing data).
TASCAM PS-1225L
DC plug
AC cord holder
AC outlet