Tascam BB-1000CD CD Player User Manual


 
TASCAM BB-1000CD
37
7–Playback
nearest marker is indicated on the right side of the track
number.
Press the
MARK key while pressing and holding the
LOOP key to delete the marker whose name is currently
indicated.
Repeat playback
You can play a track repeatedly.
Press the
LOOP key. “ ” appears and the current track is
played back repeatedly.
To stop the repeat playback, press the
LOOP key.
Loop playback (I–O LOOP)
With this function, you can continuously repeat the play-
back of a selection that you make (loop playback).
1. Press the IN key during playback to set the point
when you want to start loop playback. The current
position is set as the
IN point.
2. Press the OUT key at the point when you want loop
playback to stop. The current position is set as the
OUT point, and loop playback begins between the IN
and OUT points.
The current positions of the
IN and OUT points are
shown by the
and icons that appear below the play-
back position display bar in the lower part of the Home
screen. During loop playback the indicator also
appears.
Pressing the
¯ key during loop playback slides the
start point of the loop forward to its end point, keeping
the time length of the loop.
Pressing the
 key during loop playback slides the
end point of the loop back to its start point, keeping the
time length of the loop.
Press
IN key or OUT key while pressing and holding the
LOOP key to clear the start point or end point, respec-
tively.
NOTE
When the
OUT point is not set, the part from the IN
point to the end of the track is played back repeatedly.
When the
IN point is not set, from the beginning of the
track to the OUT point is played back repeatedly.
When the
IN and OUT points is not set, the whole track
is played back repeatedly.
To cancel the Loop playback, press the LOOP key. The IN
point and the OUT point remain and the loop playback of
the section starts again by pressing the LOOP key again.
Adjusting the volume
Use the VOLUME knob to adjust the output volume of the
built-in speaker/
PHONES jack/LINE OUT jack. The volume
indicator on the front panel lights during the adjustment.