Filter
Top Products
TASCAM BB-1000CD
35
6–Connection
Connecting monitors
You can connect headphones to the PHONES jack (stereo
mini jack) and an external audio device (powered speak-
ers, audio system, etc) to the LINE OUT jack (RCA jack) for
monitoring.
NOTE
Slide the SPEAKER switch to OFF to deactivate the built-in speak-
ers. The built-in speakers are automatically deactivated as head-
phones are connected to the PHONES jack regardless of the switch's
position.
CAUTION
The sound through microphones (both built-in and external) does
not come out of the built-in speakers. Use headphones when you
want to monitor it.
Connecting external microphones and an audio
device
The unit can record sounds from external audio equipment
as well as the built-in stereo microphones and you can
record sounds using them. You can connect the equipment
to the
LINE IN jack and the external microphone jacks. See
below how to connect them (For settings of the connections
and input level, see “8-Recording”).
Connecting to the EXT MIC jacks
You can connect microphones to the EXT MIC A (L) and
EXT MIC B (R) jacks (XLR jacks) on the left side of the unit.
CAUTION
Slide the PHANTOM switch to ON after connecting microphones •
which need power supply, such as condenser microphones. Turn
the switch off when using other types of microphones, such as
dynamic ones. Otherwise the microphones may be damaged.
Refer to the manual of the microphones for details.
Do not connect/disconnect a microphone when the PHANTOM •
switch is ON.
Connecting to the LINE IN jack
You can connect the line output of an audio device to the
LINE IN jack (RCA jack).
Powered speakers,
stereo system, etc.
Headphones
Microphones
Audio device or
external sound
source