Filter
Top Products
42
PRODUCT MANUAL 433689-01
CHAPTER 6 COMMUNICATION INTERFACE AND COMMAND PROTOCOL
SCSI Connector Requirements
Tab le 6- 4 lists the pin assignments for the tape drive’s SCSI connector.
Table 6-4 Pin assignments for the wide LVD connector
Pin # Signal Pin # Signal
1 +DB (12) 35 –DB (12)
2 +DB(13) 36 –DB(13)
3 +DB(14) 37 –DB(14)
4 +DB(15) 38 –DB(15)
5 +DB(P1) 39 –DB(P1)
6 +DB(0) 40 –DB(0)
7 +DB(1) 41 –DB(1)
8 +DB(2) 42 –DB(2)
9 +DB(3) 43 –DB(3)
10 +DB(4) 44 –DB(4)
11 +DB(5) 45 –DB(5)
12 +DB(6) 46 –DB(6)
13 +DB(7) 47 –DB(7)
14 +DB(P) 48 –DB(P)
15 GROUND 49 GROUND
16 DIFFSENS 50 GROUND
17 TERMPWR 51 TERMPWR
18 TERMPWR 52 TERMPWR
19 OPEN 53 OPEN
20 GROUND 54 GROUND
21 +ATN 55 –ATN
22 GROUND 56 GROUND
23 +BSY 57 –BSY
24 +ACK 58 –ACK
25 +RST 59 –RST
26 +MSG 60 –MSG
27 +SEL 61 –SEL
28 +C/D 62 –C/D
29 +REQ 63 –REQ
30 +I/O 64 –I/O
31 +DB(8) 65 –DB(8)
32 +DB(9) 66 –DB(9)
33 +DB(10) 67 –DB(10)
34 +DB(11) 68 –DB(11)