Filter
Top Products
5
GB
Getting Started
Hooking Up the Audio Components
Mains lead
White (L) White (L)
Red (R) Red (R)
Amplifier,
etc.
CONTROL A1
VOLTAGE
SELECTOR
CD player, DBS
tuner
CD player, DBS tuner*, Digital
amplifier, DAT deck, MD deck,
etc.**
*
Digital equipment with a DIGITAL OUT connector only
**
Digital equipment with both DIGITAL IN and OUT connectors
Required cords
Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to match the
colour-coded pins to the appropriate jacks: white (left) to white
and red (right) to red.
Optical cables (2) (only one supplied)
• When connecting an optical cable, take the caps off the
connectors and insert the cable plugs straight in until they click
into place.
• Do not bend or tie the optical cables.
Coaxial digital connecting cable (1) (not supplied)
Things you should keep in mind while
hooking up the system
• Turn off the power to all components before making
any connections.
• Do not connect any mains lead until all the connections
are completed.
• Be sure the connections are firm to prevent hum and
noise.
Jacks (connectors) for connecting audio
components
Connect To the
Amplifiers LINE (ANALOG) IN/OUT jacks
CD players or DBS tuners DIGITAL COAXIAL IN jack or
DIGITAL OPTICAL IN connector
Digital amplifiers, DAT decks,
or another MD deck
DIGITAL OPTICAL IN/OUT
connectors