Filter
Top Products
49
GB
Additional Information
Display Messages
The following table explains the various messages that
appear in the display. Messages are also displayed by the
deck’s Self-Diagnosis function (see page 51).
Message Meaning
Auto Cut The Auto Cut function is on (page 18).
Blank Disc A new (blank) or erased MD has been
inserted.
Cannot Copy An attempt was made to make a second
copy from a digitally dubbed MD (page
15).
Cannot Edit An attempt was made to edit the MD
during Programme or Shuffle Play. Or
the MD is record-protected.
Disc Full The MD is full (page 46).
Impossible The deck cannot do the specified
operation (pages 16 and 33).
Initialize (flashing) The Setup Menu settings have been lost.
Or the contents recorded by timer have
disappeared over time and are not be
available for saving to disc, or
Programme Play could not be activated
since the programme has disappeared
over time.
(The message flashes for about four
seconds when you turn on the deck by
pressing +/1.)
Name Full The naming capacity of the MD has
reached its limit (about 1,700 characters).
No Disc There is no MD in the deck.
No Name The track or disc has no name.
No Program!! You tried to start Programme Play when
no programme exists.
Premastered An attempt was made to record on a
premastered MD.
ProgramFull! The programme contains the maximum
number of tracks. You cannot add any
more tracks.
REMOTE The MD is being controlled by an
external device connected to the deck.*
Smart Space The Smart Space function is on (page 18).
TOC Reading The deck is checking the TOC (Table Of
Contents) on the MD.
*
If “REMOTE” appears under other circumstances, turn off the deck,
then turn it on again.