Filter
Top Products
13
GB
Location and Function of Parts
z
The Peak Hold Function freezes the peak level meters at the
highest level reached by the input signal
1 While the deck is stopped or playing, press MENU/NO twice.
“Setup Menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) until “P.Hold Off”
(factory setting) appears, then press AMS or YES.
3 Turn AMS (or press ./> repeatedly) to select
“P.Hold On”, then press AMS or YES.
4 Press MENU/NO.
To turn off the Peak Hold Function, select “P.Hold Off” in step 3
above.
While the deck is playing
Press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly to
change the display.
Each press of the button changes the display as follows:
z
You can check the remaining time
Press TIME. Each press of the button changes the display as
follows:
Track number and elapsed time of the
current track (default display)
Press
The contents of a programme (only when
“PROGRAM” lights up)
Press
Disc name and track name
Press
Level of the output signal
Press
Pitch display
Press
Track number and elapsed time of the
current track (default display)
Press
Track number and remaining time of the
current track
Press
Remaining time of all recorded tracks
Press
z
You can check the track name at any time while playing
Press SCROLL.
The track name appears and scrolls. While the disc name is
scrolling, press the button again to pause scrolling, and again to
continue scrolling.