Filter
Top Products
Playing MDs
24
GB
z
You can adjust the analog signal level output to the LINE
(ANALOG) OUT jacks and the PHONES jack
1 While the deck is playing, press LEVEL/DISPLAY/CHAR (or
DISPLAY) repeatedly until the line output adjustment display
appears.
2 Turn AMS (or press LEVEL +/– repeatedly) to adjust the
output signal level.
z
You can use Setup Menu to adjust the analog output level
While the deck is playing, select “Aout” in Setup Menu.
Note
When you eject the MD or turn off the deck, the output level is
reset to the factory setting (0.0 dB).
Playing a Specific Track
While the deck is playing or stopped, use the procedure
below to quickly play any track.
. >
m M
z x
X
H
A
` / 1
>.X
H
./>
>10
AMS
H
Number
buttons
Locating a track with AMS*
To go to Do the following:
The next or a succeeding
track during play
Turn AMS clockwise (or press
> repeatedly).
A preceding track during
play
Turn AMS counterclockwise (or
press . repeatedly).
The beginning of the current
track during play
Turn AMS counterclockwise (or
press . once).
A specific track while the
deck is stopped
Turn AMS (or press ./>
repeatedly) until the track
number you want to go to flashes
in the display, then press AMS or
H.
*
Automatic Music Sensor
z
To locate the last track of the MD quickly
While the deck is stopped, turn AMS counterclockwise (or press
. once).
z
If you locate a track while the deck is stopped or paused
The deck will still be stopped or paused at the beginning of the
located track.
Playing an MD