Filter
Top Products
Additional Information
71
Parts descriptions for
the remote
You can use the supplied remote to control the
system.
Note
You cannot perform the following operations with the
remote;
— Removing discs
— Selecting the recording mode
— CD-MD Synchro Recording
1
6
7
2
3
8
4
5
1 ?/1 (power) switch
2 CLOCK/TIMER SELECT button
Press to check timer settings, or to set the timer
on/off. (pages 56, 58)
CLOCK/TIMER SET button
Press to set the clock and timer functions. (pages
6, 55, 57)
continued
Speaker (SS-CMD595)
Speaker system 2-way, bass-reflex type
Speaker units
Woofer: 12 cm dia., cone type
Tweeter: 2.8 cm dia., balanced drive type
Nominal impedance 6 ohms
General
Power requirements
U.S.A. and Canadian models:
120 V AC, 60 Hz
Australian model: 220 – 240 V AC, 50/60 Hz
Chinese model: 220 V AC, 50/60 Hz
European model: 230 V AC, 50/60 Hz
Other models: 110 – 120 V or 220 – 240 V
AC, 50/60 Hz
Power consumption
U.S.A. and Canadian models:
60 watts during normal operation
Other models: 70 watts during normal operation
Dimensions (w/h/d) incl. projecting parts and controls
Amplifier/Tuner/MD/CD section:
Approx. 215 × 147 × 326 mm
Speaker: Approx. 160 × 260 × 235 mm
Mass
Amplifier/Tuner/MD/CD section:
Approx. 5.0 kg
Speakers: Approx. 2.7 kg net per speaker
Supplied accessories Remote (1)
R6 (size AA) batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Speaker cords (2)
Design and specifications are subject to change
without notice.