Filter
Top Products
Basic Operations
11
Playing an MD
To turn on the system, press ?/1 (power). You
can play an MD just like a CD.
?/1 (power)
Tips
• If you use a partially recorded MD, recording starts
after the recorded tracks.
• Depending on the disc, CD TEXT information may
also be recorded. If “TEXT” flashes during
recording, press NAME EDIT/SELECT on the
remote, and then press ENTER/YES on the remote
to record the title of the current track. (If “TEXT” is
lit, it is automatically recorded.)
• You can switch the recording mode before step 4
and record for long times. For details, see
“Recording for long times” on page 28.
Notes
• If the play mode is set to Repeat Play or Shuffle
Play, it automatically switches to normal play at
step 4.
• If the MD is record protected, “C11” and
“Protected” appear alternately and the MD cannot
be recorded. Remove the MD, then slide the record
protection tab to the closed position (see page 24).
• If “Retry” flashes in the display, a reading failure
has occurred, and the system is trying to read the
data again (see page 27).
2 Press MD HS.
Play starts. The H indicator on the
MD HS button lights green.
Track number Playing time
continued
With the arrow
pointing toward
the deck
With the label
side up, and the
shutter on the
righthand side
2
MD Z
MD/CD
.m/M>
VOLUME
MD x
1 Insert an MD.