Filter
Top Products
6
Step 2: Setting the time
You must set the time beforehand to use the timer
functions.
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.
The 12-hour system is used for illustration
purposes.
3,4,5
3,4,5
3,4,5
2
1
3,4
DISPLAY
TCURSOR
1 Turn on the system.
2 Press CLOCK/TIMER SET.
The time setting display appears, and the day
indication “SUN” flashes.
3 Press – or + to set the day, then press
ENTER/YES or CURSORt.
The hour indication flashes.
(For models using a 12-hour system, noon is
indicated as 0:00 PM, and midnight as
0:00 AM.)
4 Press – or + to set the hour, then press
ENTER/YES or CURSORt.
The minute indication flashes.
5 Press – or + to set the minute, then press
ENTER/YES.
The clock starts.
If you made a mistake
Press TCURSOR or CURSORt until the
indication you wish to change (day, hour, minute)
flashes, then change the setting.