Filter
Top Products
Additional Information
69
S.F Edit NOW
You pressed ?/1 while in S.F Edit (changing
the recording level after recording, Fade-in,
Fade-out) mode.
If you turn off the deck while in S.F Edit mode,
any changes that you have made will not be
made properly. Finish the changes and leave
S.F Edit mode before turning off the deck. If
you accidentally turn off the deck while
changes are being made, press ?/1 while the
message is displayed.
Smart Space
The signal was input again after silence
continued for about 3 or more but less than
about 30 seconds during digital recording.
Text Protect
There is CD TEXT information which cannot
be recorded on the MD.
TOC Reading
The MD deck is reading the TOC information
of the MD.
TOC Writing
The MD deck is writing the information of
recorded or edited contents.
Track End
You have reached the end of the track while
adjusting the dividing point during the Divide
Function.
CD
Check and CD Position appear alternately
The disc could not be read properly.
Complete!
CD editing (Disc Memo) finished normally.
File Full
There are already 100 disc titles stored in the
system.
No Disc
There is no disc in the CD player.
—OVER—
You have reached the end of the CD while
keeping pressing MD/CD M> during
pause.
Push STOP!
You pressed PLAY MODE during play.