Filter
Top Products
The MD Deck
— Play
23
Using the display
You can check the time remaining in a single
track, or on an entire MD. You can also check the
disc title or a track title of an MD. Use the
DISPLAY button (top) and the TIME button
(bottom) to switch the display.
TIME
DISPLAY
Use the DISPLAY button to
switch the display.
Use the TIME button to switch the display.
Checking the remaining time
, Press TIME during play.
Each time you press the button, the display
changes as follows:
t Elapsed playing time on the current track
r
Remaining time on the current track
r
Remaining time on the current MD
Checking the total playing
time
, Press TIME in stop mode.
Each time you press the button, the display
changes as follows:
Total number of tracks and total playing time
Y
Remaining recordable time* on the MD
* The remaining recordable time on the MD
changes according to the recording mode.
Checking a track title or a
disc title
, Press DISPLAY during play or in stop
mode.
Each time you press the button, the display
changes as follows:
t Preset Equalizer name
r
Clock
r
Volume
r
Track title or disc title*
* The track title appears during play, and the
disc title appears while stopped. If an MD
that has no title is loaded, nothing appears.
To scroll a long name
Press SCROLL on the remote.
The title appears scrolling in the display.
Tip
To label a disc title or track titles to an MD, see
“Labeling an MD” on page 38.