Filter
Top Products
59
Other Features/Connecting optional components
Connecting optional
components
Connecting optional A/V
components
To enhance your system, you can connect optional
components. Refer to the operating instructions of
each component.
Connecting the audio cords (not
supplied)
When using audio cords (not supplied) to connect
other A/V components to the system, make sure to
insert the plugs firmly, pushing them in all the
way. No sound will be produced if the plugs are
not inserted securely.
Not pushed in all the way
Insert completely
Connecting a portable MD,
etc.
Connect a portable MD, etc., to the ANALOG IN
jack on the front panel of the unit, using an audio
connecting cord (not supplied).
N.G.
OK
Stereo mini-
plug
Portable MD,
etc.
Audio connecting
cord
TAPE CONTROL jack
Tip
The A and B markings of the TAPE IN/OUT jacks
guide you to connect the optional TC-TX595 tape
deck.
Connecting another tape deck
Connect a tape deck to the TAPE IN and OUT
jacks on the rear panel of the unit, using audio
connecting cords (not supplied).
System cable
adaptor
Connecting the optional TC-
TX595 tape deck (European
model only)
CD-TAPE Synchro Recording and Timer
Recording are possible when the TAPE
CONTROL jack is connected.
Refer to the operating instructions included with
the TC-TX595 tape deck for details.
To the audio
input of a tape
deck
To the audio
output of a
tape deck
TAPE
OUT jacks
TAPE IN
jacks
Tape deck
continued