Filter
Top Products
Getting Started
9
GB
Speakers
* Gray: Front speakers
Red: Surround speakers and Center speaker
3 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Note
Keep the antennas away from the speaker cords.
4 Connect the video input jack of your TV
to the VIDEO OUT jack with the video
cord.
When using a TV
Turn on the TV and select the video input so you can
view the pictures from this system.
When connecting a video deck
Connect the TV and the video deck using video and
audio cords (not supplied) as shown below.
If you connect a video deck between this system and the
TV, you may experience video leakage when watching
the video signal from this system. Do not connect a
video deck between this system and the TV.
Note
Do not place the TV on this system.
Tip
For even higher quality video images:
– Use an optional component video cord to connect the
COMPONENT VIDEO input jacks on your TV to
the COMPONENT VIDEO OUT jacks of this
system. If your TV is compatible with progressive
format file signals, use this connection and set
“COMPONENT OUT” to “PROGRESSIVE” in
“Adjusting the TV screen” (page 26).
– You can use an optional S-video cord to connect the
S VIDEO input jack on your TV to the S VIDEO
OUT jack.
5 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
* Saudi Arabian model: 120 – 127 V
Gray or Red*
(3)
Black (#)
Gray or Red*
(3)
Black (#)
Extend the FM lead antenna horizontally
AM loop antenna
VIDEO OUT
TV
Video deck System
Do not connect
directly.
continued