Filter
Top Products
DVD – Various functions
33
GB
Adjusting the speaker volume
and level
1 Press DVD SET UP in stop mode.
The Setup Display appears.
2 Press M or m repeatedly to select
“SPEAKER SETUP”, then press
ENTER.
3 Press M or m repeatedly to select
“TEST TONE”, then press ENTER.
4 Press M or m repeatedly to select “ON”,
then press ENTER.
You will hear the test tone from each
speaker in sequence.
5 From your listening position, adjust the
value of “BALANCE” and “LEVEL”
using M/m/</,.
The test tone is emitted from both left and
right speakers simultaneously.
6 Press ENTER when you finish
adjusting.
7 Press M or m repeatedly to select
“TEST TONE”, then press ENTER.
8 Press M or m repeatedly to select
“OFF”, then press ENTER.
Tip
To adjust the balance or the level without listening to
the test tone, select “BALANCE” or “LEVEL” in step
3 and press ENTER, then adjust the balance or level
using M/m and press ENTER.
x LEVEL
You can vary the level of each speaker as
follows. Be sure to set “TEST TONE” to “ON”
for easy adjustment.
The default settings are underlined.
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
The default settings are underlined.
x TEST TONE
The speakers will emit a test tone to adjust
“BALANCE” and “LEVEL”.
The default settings are underlined.
CENTER
0 dB
Adjust the level of the center
speaker (–6 dB to +6 dB,
1 dB increments).
SURROUND LEFT
0 dB
SURROUND RIGHT
0 dB
Adjust the level of the
surround speakers (–6 dB to
+6 dB, 1 dB increments).
SUBWOOFER
0 dB
Adjust the level of the
subwoofer (–10 dB to
+10 dB, 1 dB increments).
FRONT
– – – (center
)
Adjust the balance between the
front left and right speakers
(6 steps left or right).
OFF
The test tone is not emitted from
the speakers.
ON The test tone is emitted from each
speaker in sequence while
adjusting balance or level. When
you select one of the “SPEAKER
SETUP” items, the test tone is
emitted from both left and right
speakers simultaneously.