Filter
Top Products
DVD – Various functions
31
GB
Area code
To obtain the best possible surround sound, set
the speakers you have connected and their
distance from your listening position.
Then use the test tone to adjust the volume and
the balance of the speakers to the same level.
Setting the speakers
1 Press DVD SET UP in stop mode.
The Setup Display appears.
2 Press M or m repeatedly to select
“SPEAKER SETUP”, then press ENTER.
3 Press M or m repeatedly to select “SIZE”
or “DISTANCE”, then press ENTER.
4 Press M or m repeatedly to select the
setup item, then press ENTER.
5 Press M or m repeatedly to select or set
a setting, then press ENTER.
x SIZE
When you do not connect center or surround
speakers, or you move the surround speakers, set
the parameters for CENTER, SURROUND and
SUBWOOFER. Since the front speaker setting
is fixed, you cannot change it.
* These settings are not available on European,
Russian and Latin American models.
Standard Code number
Argentina 2044
Australia 2047
Austria 2046
Belgium 2057
Brazil 2070
Canada 2079
Chile 2090
China 2092
Denmark 2115
Finland 2165
France 2174
Germany 2109
Hong Kong 2219
India 2248
Indonesia 2238
Italy 2254
Japan 2276
Korea 2304
Malaysia 2363
Mexico 2362
Netherlands 2376
New Zealand 2390
Norway 2379
Pakistan 2427
Philippines 2424
Portugal 2436
Russia 2489
Singapore 2501
Spain 2149
Sweden 2499
Switzerland 2086
Taiwan 2543
Thailand 2528
United Kingdom 2184
Speaker settings
— SPEAKER SETUP
FRONT YES
CENTER YES: Normally select this position.
NONE: Select this when a center
speaker is not used.
SURROUND YES
: Normally select this.
BEHIND (LOW)
, BEHIND
(HIGH), SIDE (LOW), SIDE
(HIGH)*: Specify the position and
height to implement the Digital
Cinema Surround modes.
NONE: Select this when surround
speakers are not used.
SUBWOOFER NONE
: Normally select this.
YES: Select this when an optional
sub woofer is used.
continued