Filter
Top Products
DVD/VIDEO CD/CD/MP3/JPEG – Play
15
GB
Notes
• If DVD playback is paused for approximately one
hour, the system automatically turns off.
• Depending on the DVD or VIDEO CD, some
operations may be restricted.
• 2 channel sound is heard when using headphones.
• During Slow-motion Play, no sound is output.
• You cannot perform Slow-motion Play with MP3
and CD-DA.
• You cannot change the play mode during play.
• Some time may be needed to start playback of discs
recorded in complex configurations such as many
layers.
• The system can play MP3 (MPEG1 Audio Layer3)
audio. The system cannot play audio tracks in
MP3PRO format.
• This system can play Multi Session CDs when an
MP3 audio track is located in the first session. Any
subsequent MP3 audio tracks, recorded in the later
sessions, can also be played back.
• Maximum number of albums on a disc: 99 (The
maximum number of MP3 audio tracks that can be
contained on an album is 250.)
• An album that does not include an MP3 audio track
is skipped.
• If you put the extension “.MP3” to data not in MP3
format, the system cannot recognize the data
properly and will generate a loud noise which could
damage your speaker system.
• When the system cannot play MP3, remove the disc
and select “CUSTOM SETUP” from the setup items.
Then select “DATA CD PRIORITY” and set to
“MP3” (page 25) and insert the disc again.
• The system can play to a depth of 8 directories.
Tip
When disc access takes a long time, set “DVD
POWER ON” by DVD power manage function
(page 37).
Resuming playback from the
point you stopped the disc
— Resume Play
This system memorizes the point where you
stopped the disc so you can resume from that
point. Resume Play is not canceled when you
turn off the system.
1 While playing a disc, press x to stop
playback.
“RESUME” appears in the display. If
“RESUME” does not appear, Resume Play
is not available.
2 Press nN.
The player starts playback from the point
you stopped the disc in step 1.
Notes
• You cannot perform Resume Play during Shuffle
Play or Program Play.
• Depending on where you stopped the disc, the
system may resume playback from a different point.
• Resume play is canceled when:
– you press x.
– you disconnect the mains lead.
– you open the disc tray.
– you change the play mode.
– you change the settings using the DVD DISPLAY
or DVD SET UP button.
Playing a track by entering the
track number (on the remote only)
Press the number button(s) to enter the track
number of the track you want to play. (To enter
the MP3 audio track number, press ALBUM –
or + repeatedly to select the desired album
before entering the number.)
To enter a track number over 10
1 Enter the corresponding digits.
To enter 0, press 10/0.
2 Press ENTER.
Example:
To play track number 30, press 3 and 10/0, then press
ENTER.
To play MP3 track number 100, press 1, 10/0 and
10/0, then press ENTER.