Filter
Top Products
Troubleshooting
61
GB
To return the DVD setup to the
default settings, perform reset as
follows:
1 Press DVD SET UP in stop mode.
2 Press M or m repeatedly to select “RESET”,
then press ENTER.
3 Press M or m repeatedly to select “YES”,
then press ENTER.
It takes a few seconds to complete. Do not
press ?/1 when resetting the system.
One of the following messages may appear or
flash in the display during operation.
DVD/VIDEO CD/CD/MP3/JPEG
Cannot Play
• A disc that cannot be played was inserted.
• A disc with an unsupported Region code was
inserted.
Cannot Use
You pressed an invalid button.
Data Error
The JPEG file is an unsupported format.
No Disc
There is no disc in the CD/DVD player.
Play Limit
The MP3 file cannot be played.
Push STOP!
You pressed PLAY MODE during play.
Reading
The system is reading information of the disc. Some
buttons are not available.
Step Full!
You tried to program 26 or more tracks (steps).
Tape
No Tab
You cannot record the tape because the tab has been
removed from the cassette.
No Tape
There is no tape in the tape deck.
Messages