Sony MHC-WZ88D Stereo System User Manual


 
Timer
75
GB
6 Load a recordable tape into deck B.
Make sure the tape is in the front side.
7 Press DIRECTION on the unit
repeatedly to select “g” to record on
one side or “j” (or “RELAY”) to
record on both sides.
When recording from the reverse side, press
FUNCTION +/– (or TAPE A/B on the unit)
repeatedly until “TAPE B” appears in the
display. Then, press H
(or hH on the
unit) repeatedly until the TAPE B reverse
side indicator lights up to start playback of
reverse side. Press x at the point where you
want to start recording.
When recording on both sides, be sure to
start from the front side. If you start from
the reverse side, recording stops at the end
of the reverse side.
8 Press ?/1 to turn off the system.
Other operations
Notes
You cannot select the Play Timer and the Timer
Recording at the same time.
If you use the Timer Recording and the Sleep Timer
at the same time, the Sleep Timer has priority.
The Timer Recording will not be activated if the
system is turned on or if “STANDBY” flashes in the
display.
The volume is reduced to minimum during Timer
Recording.
Do not operate the system from the time the system
turns on until the recording starts (about 30 seconds
before the preset time).
Tips
The system turns on 30 seconds before the preset
time.
When Timer Recording is selected, “REC” lights up
in the display.
To Do this
Check the setting 1 Press TIMER MENU.
“TIMER SEL?” appears in
the display.
2 Press ENTER.
3 Press V or v repeatedly to
select “REC SELECT?”,
then press ENTER.
Change the setting Start from step 1.
Cancel the Timer
Recording
1 Press TIMER MENU.
“TIMER SEL?” appears in
the display.
2 Press ENTER.
3 Press V or v repeatedly to
select “TIMER OFF?”, then
press ENTER.