Filter
Top Products
56
GB
x LEVEL (FRONT)
You can vary the level of the front speakers,
center speaker and sub woofer as follows. Be
sure to set “TEST TONE” to “ON” for easy
adjustment. The items that are set to “NONE” in
“SIZE” cannot be selected.
Depending on the sub woofer, the sound output
may be smaller compared to other speakers
when you adjust the “SUBWOOFER” setting
during test tone.
x LEVEL (SURROUND)
You can vary the level of each surround
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
This setting cannot be selected when
“SURROUND” is set to “NONE” in the “SIZE”
setting.
Tip
To adjust the volume of all speakers at the same time,
press VOLUME +/– repeatedly (or turn VOLUME on
the unit).
x TEST TONE
The speakers will emit a test tone to adjust
“LEVEL (FRONT)” and “LEVEL
(SURROUND)”.
Adjusting the speaker level by
using the test tone
1 Press DISPLAY when playback is
stopped.
The Control Menu appears in the on-screen
display.
2 Press V or v repeatedly to select
(SETUP), then press ENTER.
The options for “SETUP” appear in the on-
screen display.
3 Press V or v repeatedly to select
“CUSTOM”, then press ENTER.
The Setup menu appears in the on-screen
display.
4 Press V or v repeatedly to select
“SPEAKER SETUP”, then press
ENTER or
b.
5 Press V or v repeatedly to select
“TEST TONE”, then press ENTER or
b.
6 Press V or v repeatedly to select
“ON”, then press ENTER.
You will hear the test tone from each
speaker in sequence except for sub woofer.
7 Press V or v repeatedly to select
“LEVEL (FRONT)”, then press ENTER.
8 Press V or v repeatedly to select the
speaker, then press ENTER.
The test tone is emitted from the selected
speaker.
9 Press V or v repeatedly to adjust the
level from your listening position.
L
0.0 dB
Set this between –6.0 dB and 0.0 dB
in 1.0 dB increments.
R
0.0 dB
Set this between –6.0 dB and 0.0 dB
in 1.0 dB increments.
CENTER
0.0 dB
Set this between –6.0 dB and
+6.0 dB in 1.0 dB increments.
SUBWOOFER
0.0 dB
Set this between –10.0 dB and
+10.0 dB in 1.0 dB increments.
L
0.0 dB
Set this between –6.0 dB and
+6.0 dB in 1.0 dB increments.
R
0.0 dB
Set this between –6.0 dB and
+6.0 dB in 1.0 dB increments.
OFF
The test tone is not emitted from the
speakers.
ON
The test tone is emitted from each speaker
in sequence except for sub woofer. The test
tone is emitted from the selected speakers
when you select “LEVEL (FRONT)” or
“LEVEL (SURROUND)”.