Filter
Top Products
Getting Started
13
GB
4 Place the sub woofer if you have
connected an optional sub woofer.
To obtain a better bass reproduction, we
recommend you to place the sub woofer on
a solid floor where resonance is unlikely to
occur.
Notes
• Do not place the surround speakers on top of a TV.
This may cause distortion of the colors in the TV
screen.
• If you place the center speaker on the unit, be sure to
place it at the front side of the unit.
• Always place the sub woofer vertically, keeping it a
few centimeters away from the wall.
• If the sub woofer is placed in the center of a room, the
bass could be extremely weakened. This is due to the
influence of the standing wave of the room. If this
happens, move the sub woofer away from the center
of the room or eliminate the cause of the standing
wave, by placing a bookshelf against the wall, etc.
Speaker settings
To enjoy DVD VIDEOs and other discs with
multi-channel sound and Dolby surround
effects, the speakers need to be adjusted. Set the
distance from the listening position to the
speakers, and the speaker level. Then, use the
test tone to adjust the volume of each speaker to
the same level.
For details, see “Setting the speakers” on
page 54.
1 Press ?/1 to turn on the system.
2 Press TIMER MENU.
The hour indication flashes in the display.
3 Press V or v repeatedly to set the
hour.
4 Press ENTER.
The minute indication flashes in the
display.
5 Press V or v repeatedly to set the
minute.
6 Press ENTER.
The clock starts functioning.
To adjust the clock
1 Press TIMER MENU.
2 Press V or v repeatedly to select “CLOCK
SET?”, then press ENTER.
The hour indication flashes in the display.
3 Do the same procedure as steps 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
(page 76).
Setting the clock