Filter
Top Products
5
EN
Getting Started
Hookups
Connecting the deck to an amplifier
Connect the amplifier to the LINE (ANALOG) IN/
OUT jacks using the audio connecting cords (supplied),
making sure to match the color-coded cords to the
appropriate jacks on the components: red (right) to red
and white (left) to white. Be sure to make connections
firmly to prevent hum and noise.
çç
çç
ç: Signal flow
Connecting the deck to a digital component such as
a CD player, DAT deck, digital amplifier, or another
MD deck
Connect the component through the DIGITAL
OPTICAL IN1/IN2/OUT or DIGITAL COAXIAL IN
connectors with two optical cables (only one supplied)
and/or a coaxial digital connecting cable (not
supplied).
When using the optical cables
Take the caps off the connectors and then insert the plugs
parallelly until they click into place.
Be sure not to bend or tie together the optical cables.
You can connect the optical cable to
either OPTICAL IN1 or IN2.
çç
çç
ç: Signal flow
MD deck Amplifier
When using the coaxial digital connecting cable
çç
çç
ç: Signal flow
z If “Din Unlock” and “C71” alternate in the display
The optical cables and/or the coaxial digital connecting
cable are not connected properly. Check that the
connections are secure.
z Automatic conversion of digital sampling rates
during recording
A built-in sampling rate converter automatically
converts the sampling frequency of various digital
sources to the 44.1 kHz sampling rate of your MD deck.
This allows you to record sources such as 32- and 48-
kHz DAT or satellite broadcasts, as well as compact
discs and other MDs.
Note
If “Din Unlock” alternates with “C71”, or “Cannot Copy”
flashes in the display, recording through the digital
connector is not possible. In this case, record the program
source through the LINE (ANALOG) IN jacks with “ANLG”
selected by A-INPUT or B-INPUT.
Connecting the AC power cord
Connect the AC power cord to a wall outlet or to the
outlet of a timer.
MD deck
Digital component
MD deck Digital component
ç
Ç
TAPE / MD
L
R
INOUT
LINE (ANALOG)
R
L
OUT
IN
DIGITAL
OUTIN
OPTICAL
ç
Ç
DIGITAL
OUT
IN IN1 IN2
COAXIAL OPTICAL
Ç
DIGITAL
OUT
COAXIAL
DIGITAL
OUT
IN IN1 IN2
COAXIAL OPTICAL