Filter
Top Products
Editing Recorded MDs
42
EN
Editing Between Two MDs
You can do a special edit (DiscnDisc) between two
MDs in deck A and deck B, using the following
functions:
• All Move Function
• 1Tr Move Function
• Name Copy Function
Note that you cannot use the Undo Function (page 41)
to return to the previous condition for these special
edits.
Moving the contents of an entire MD
(All Move Function)
This function can reorganize the TOC of an MD that
has been edited repeatedly, while moving the contents
of that MD to another MD. (The TOC includes the
information such as track numbers and the order of
tracks, etc.)
Reorganizing the contents of an MD reduces battery
power consumption when listening to the MD on a
portable MD player, and increases the amount of time
available for recording on the MD. You can move the
contents in either direction between deck A and
deck B.
1 While the deck is stopped, press MENU/NO on
deck A to display EDIT menu.
The contents of an MD in deck A move to an MD
in deck B. To move the contents from deck B to
deck A, press MENU/NO on deck B.
2 Turn AMS to select “DiscnDisc”, then press
AMS or YES.
3 Turn AMS to select “All Move”, then press AMS
or YES.
“OK??” starts flashing.
4 Press AMS or YES.
The contents of an MD in deck A are moved to an
MD in deck B and disappear from deck A.
While moving the contents, the deck performs
high-speed playback and the volume may fall or
the sound may drop out. However, this is not a
problem.
Moving the contents takes approximately 1/4 of
the total playing time of all recorded tracks on the
MD.
When the deck finishes moving the contents,
“Complete
” appears for a few seconds.
To cancel the All Move Function
Press MENU/NO or p before Step 4.
z If the MD to which the contents of another MD are
moved already has a disc name, the disc name is not
overwritten.
Notes
• Be sure to use a blank disc to which the contents are
moved using the All Move Function.
• You cannot use the All Move Function, if the total playing
time of the MD to be moved is longer than that of the MD
to which the contents are moved.
• Once you have moved the contents of an entire MD using
the All Move Function, you cannot return to the previous
condition even if you use the Undo Function on page 41.
Moving recorded tracks between two MDs
(1Tr Move Function)
Use the 1Tr Move Function to move any track on the
MD in deck A to the end of the recorded portion on the
MD in deck B. You can also move any track from deck
B to deck A.
1 While the deck is stopped, playing, or pausing,
press MENU/NO on deck A to display EDIT
menu.
To move a track from deck B to deck A, press
MENU/NO on deck B.
≠ AMS ±
p
0
)
r
·
§
EJECT
P
§
EJECT
≠ AMS ±
p
0
)
r
·
P
≠ AMS ±
MENU/NO
MENU/NO
YES YES
≠ AMS ±
p
0
)
r
·
§
EJECT
P
§
EJECT
≠ AMS ±
p
0
)
r
·
P
≠ AMS ±
MENU/NO
MENU/NO
YES YES