Filter
Top Products
Basic Operations
12
EN
4
Press MD SYNC.
The MD SYNC indicator turns on and deck B becomes ready to
record.
For All Tracks Dubbing and Program Dubbing,
“DUBBING : All” and “OK??” appear, then deck A changes to
playing pause at the start of the first track to be recorded.
For One Track Dubbing, “DUBBING : 1Tr” and “OK??”
appear, then deck A plays the selected track repeatedly.
“A-MD” (digital recording) or “ANLG A-MD” (analog
recording) is selected automatically according to the
generation of the MD in deck A (see page 47).
5
Press AMS, · or YES for either deck A or deck B.
Recording starts. The sound of deck B is output.
To Press
Cancel the procedure MENU/NO
Stop recording p
Do not disconnect the deck from the power source immediately after
recording
If you do, recorded material may not be saved to the MD. To save the
material, after recording, press § EJECT to take out the MD or change the
deck to standby by pressing 1/u. “TOC Writing” will appear at this time.
After “TOC Writing” goes out, you can pull out the AC power cord.
z The recording mode (stereo recording or monaural recording) and the
recording level are the same as the MD in deck A.
z You can copy the disc* and
track titles from the MD in
deck A to the MD in deck B
(Title Copy Function)
If the MD in deck A has a disc
title or track titles, they are all
recorded on the MD in deck B.
However, if the MD in deck B
already has a title, the disc title
cannot be copied. In addition,
the disc and track titles of
premastered MDs are not
copied.
* The disc title is copied only
when All Tracks Dubbing.
Note
You cannot display menu screens
during MD Synchro-Recording.
If you press MENU/NO, recording
stops.
When “TOC Writing” appears in
the display
The deck is currently updating the
Table Of Contents (TOC). Do not
move the deck or pull out the AC
power cord. Changes to an MD
made through recording are saved
only when you update the TOC by
ejecting the MD or changing the
deck to standby by pressing the
1/u switch.