Filter
Top Products
Additional Information
43
-EN
MDP-V9K.3-856-640-13 (En, C1, C2)
Specifications
System
Type
VIDEO CD/CD/LD player
Signal readout
Optical (Laser beam reflection)
Signal format system
EIA standard, NTSC color
system
CCIR standard, PAL color
system (for VIDEO CDs only)
Playing time
See “Optical discs” on page 44.
Digital audio specifications
Signal-to-noise ratio
More than 115 dB (EIAJ)*
Dynamic range
More than 99 dB (EIAJ)
Wow and flutter
Below measurement limit
(± 0.001 % W.PEAK) (EIAJ)
Video specification
Horizontal video resolution
425 lines (LD)
Signal-to-noise ratio
More than 50 dB
* Measured according to EIAJ (Electric
Industries Association of Japan)
standards.
Input and Output
LINE OUT 1, 2
VIDEO output, Phono jack (1)
Output signal: 1 Vp-p, 75 ohms,
unbalanced
AUDIO output, Phono jacks (2)
Stereo L, R
Analog: 200 mVrms
(1 kHz, 40 % modulation)
Digital: 200 mVrms
(1 kHz, –20 dB)
S VIDEO OUT 1, 2
Luminance: 1 Vp-p, 75 ohms,
unbalanced, sync negative
Chrominance: 0.286 Vp-p, 75
ohms, unbalanced
OPTICAL DIGITAL OUT
–18 dBm, wavelength 660 nm
Dolby AC-3 RF OUT
Phono jack (1)
Output level: 400 m Vp-p
Output impedance: 75 ohms
HeadPHONES output
12 mW (8 ohms)
LINE IN
VIDEO input, Phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO input, Phono jacks (2)
Stereo L, R
Max. input level: 200 mVrms
(–20 dB)
Input impedance:
more than 47 kilohoms
MIC 1/2 jacks
Standard jacks
1 mV
(Impedance below 1 kilohm)
General
Power requirements
110–240 V AC, 50/60 Hz
Power consumption
45 W
Operating temperature
5°C to 35°C
Ambient humidity
5% to 90 %
Dimensions
Approx. 430 × 127.5 × 413.5 mm
(w/h/d)
including projecting parts and
controls
Mass
Approx. 6.8 kg
Supplied accessories
Remote Commander RMT-M45A (1)
R6 (size AA) batteries (2)
Audio/Video Cable
(phono plug 3 ˜ phono plug 3) (1)
AC plug adaptor (supplied with
models other than Hong Kong model)
(1)
Cushions (4)
Design and specifications are subject to
change without notice.