Filter
Top Products
Basic Operations
11
-EN
MDP-V9K.3-856-640-13 ( En , C1, C2)
To view a PAL VIDEO CD
Set the COLOR SYSTEM selector on the rear panel to the appropriate
position, according to your TV. See “COLOR SYSTEM selector setting
(only for VIDEO CDs)” on page 7 for details.
AUTO setting; when a PAL VIDEO CD is played, the VIDEO CD PAL
OUT indicator on the player lights up.
PAL setting; when a VIDEO CD is played, the VIDEO CD PAL OUT
indicator on the player lights up.
The indicator also lights up even when an NTSC disc is played.
However, the picture is not played properly.
To Press
Stop play p STOP
Pause play P PAUSE
Resume play after pause P PAUSE or · SELECT/PLAY
Scan forward or backward 0/) SCAN
Skip chapters or tracks =/+ PREV/NEXT (ACS/AMS)
Play step by step /7 STILL/STEP (CAV LDs only)
Go to a chapter/track Number button
During PBC VIDEO CD playback, press
number buttons to select items in the on-
screen menu (see page 15 for details).
Remove the disc 6 OPEN/CLOSE
To start playing from the beginning of either LD side
Press DISC SIDE A to play the upper side of the LD from the beginning.
Press DISC SIDE B to play the other side of the LD from the beginning.
To pause playing just before starting
Press P PAUSE instead of pressing · SELECT/PLAY after you place
the disc on the tray.
The disc tray closes and the player waits at the start of the disc until you
press · SELECT/PLAY or P PAUSE. If you want to start from side B
of an LD, press P PAUSE, then DISC SIDE B.
To stop playing and turn off the player
Press POWER.
You can resume playback of an LD from the point you stopped at by
simply pressing · SELECT/PLAY (see “Resuming LD/VIDEO CD
playback” on page 23 ).
To stop playing and remove the disc
Press 6 OPEN/CLOSE.
Remove the disc and press 6 OPEN/CLOSE again to close the empty
tray.
To listen with headphones
Plug headphones into the PHONES jack on the front panel and adjust
the volume with the level control beside the jack.
7
z
• When playing a double-
sided LD, the player
determines that the upper
side of the disc is side “A”
and the other side is “B,”
regardless of the label “A”
or “B” printed on the disc.
• When playing side A of an
LD, “SIDE A” appears on
the front panel display.
When playing side B of an
LD, “SIDE B” appears on
the front panel display.
• When playback of LD side
B ends, the player stops.
• When playing a CD or
VIDEO CD, the DISC SIDE
B button does not function.
Note
• When you press P PAUSE,
the picture goes blank
when playing a CLV LD,
and the picture freezes
when playing a CAV LD or
VIDEO CD (see “Viewing
frame-by-frame action” on
page 22).