Filter
Top Products
10
-EN
Basic Operations
MDP-V9K.3-856-640-13 ( En , C1, C2)
6
OPEN/CLOSE
POWER
·
SELECT/PLAY
This section shows you how to play an LD, CD or VIDEO CD.
Before you start...
Connect the player to your TV and set the input selector on the TV to
“Video” (see “Connecting the player” on page 6 ).
Loading and playing a disc
1 Press POWER to turn on the player.
You can also directly turn on the player by
pressing · SELECT/PLAY on the remote
commander or player.
2 Press 6 OPEN/CLOSE to open the disc tray.
The front cover of the player automatically slides
down and the disc tray comes out.
3 Place a disc on the disc tray.
Place only one disc on the tray,
carefully fitting it in the circle on the
tray.
4 Press · SELECT/PLAY.
The disc tray closes and the disc starts
playing. You can also start playing by
pressing the disc tray to close it.
When you play a double-sided LD
The upper side of the LD (side A) starts playing. When the upper side
ends, the other side (side B) starts playing automatically.
To play a VIDEO CD with Play Back Control (PBC) functions
(Ver. 2.0 VIDEO CD)
Ver. 2.0 VIDEO CDs have Play Back Control (PBC) functions, which
allow you to play them interactively. When press · SELECT/PLAY or
push in the disc tray in step 4 , a menu appears on the screen and the
player waits for you to play the disc using the PBC functions. To play a
VIDEO CD using PBC functions, see “Playing a VIDEO CD using PBC
functions” on page 15 for details.
Basic Operations
Playing a disc
z
• You can also turn on the
player by pressing
§ OPEN/CLOSE on the
player.
Notes
• If you place more than one
disc on the tray, or if the
disc is not seated properly,
the disc may not start
playing, and may cause
damage the disc or player.
• Do not transport the player
while playing a disc as
doing so may damage your
disc or player.
• Do not use a CD stabilizer
when playing a CD or
VIDEO CD as doing so may
damage your disc or player.
LD (Side A)
CD, VIDEO CD, or LD
Single
(Label faces up)