32
5 While monitoring the sound, press .
or > repeatedly to adjust the point to
be divided.
You can shift the point by 1/86 second
(1 frame) intervals*.
To shift the point by second or minute
intervals, press m or M so that second
or minute flashes, then press . or >.
* You can shift the starting point by 2-frame
intervals (in Monaural mode and LP2 Stereo
mode) or by 4-frame intervals (in LP4 Stereo
mode).
6 Press ENTER/YES on the remote.
“Complete!” appears.
Note
If you divide a labeled track (see page 27) into two
tracks, only the first track retains the track title.
Example:
12
12
43
3
45
Andante
Andante
Adagio
Adagio
Allegro
Allegro
The new track is not labeled
Combining recorded
tracks
— Combine Function
You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
You can also use this function to erase
unnecessary track numbers.
Example: Combining track 3 to track 1.
12
12
43
3
A
ACBD
DCB
Example: Combining track 1 to track 4.
12
12
43
3
4
5
A
BC D A
DCB
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
2 Press MENU/NO on the remote to
display “Edit Menu.”
3 Press . or > repeatedly until
“Combine?” appears, and then press
ENTER/YES on the remote.
Dividing recorded tracks (continued)
Track
number
Original
tracks
After
COMBINE
Original
tracks
After
COMBINE