Filter
Top Products
28
Labeling an MD (continued)
4 Enter a character.
If you have selected uppercase or
lowercase letters
1 Press the corresponding letter button on
the remote repeatedly until the
character to be entered flashes.
Or, press the button once and press .
or > repeatedly.
2 Press CURSORt on the remote.
The flashing character is entered and the
cursor shifts to the right.
If you have selected numbers
Press the corresponding number button on
the remote.
The number is entered and the cursor shifts
to the right.
To enter a blank space
1 Press NAME EDIT/SELECT on the
remote to select upper case or lower
case letters.
2 Press 10/0 on the remote.
A blank space is entered and the cursor
shifts to the right.
5 Repeat steps 3 and 4 to enter the rest
of the name.
To change a character
Press TCURSOR or CURSORt on the
remote repeatedly until the character to be
changed flashes, press CLEAR on the
remote to erase the character, then repeat
steps 3 and 4.
6 Press ENTER/YES on the remote to
complete the labeling procedure.
The titles you labeled appear sequentially,
and then the original display appears.
Note
You can label a track title during play. The play
repeats until you finish labeling.
Checking the titles
To check the disc titles, press SCROLL on the
remote in stop mode. To check the track title,
press SCROLL on the remote during play. The
title appears scrolling in the display. To stop
scrolling, press SCROLL on the remote. Press
the button again to resume scrolling.
Erasing the titles
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
2 Press MENU/NO on the remote in stop
mode.
3 Press . or > repeatedly until “Nm
Erase?” appears, and then press
ENTER/YES on the remote.
4 Press . or > repeatedly until the
track number of the track title you want
to erase appears (or “Disc” when you
want to erase the disc title). Then press
ENTER/YES on the remote.