Filter
Top Products
Tuner
95
GB
When the system is set to “TUNER FM” or
“TUNER AM,” you can check the frequency
using the front panel display.
Press DISPLAY.
Each time you press DISPLAY on the remote,
the display changes as shown.
1 Station name*
2 Frequency**
* This is displayed if you have entered a name for a
preset station.
** Returns to the original display when several seconds
has elapsed.
You can operate the tuner function using the
tuner menu on the front panel display.
To preset radio stations
1 Press FUNCTION repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
2 Press and hold TUNING +/– until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) light up in the front panel display.
3 Press TUNER MENU.
4 Press X/x repeatedly until
“MEMORY?” appears in the front panel
display.
5 Press or c.
A preset number appears in the front panel
display.
6 Press X/x to select the preset number
you want.
Ti
p
• You can select the preset number directly by
pressing the number buttons.
7 Press .
“COMPLETE!” appears in the front panel
display, and the station is stored.
8 Repeat Steps 2 to 7 to store other
stations.
9 Press TUNER MENU.
The system menu turns off.
To change the preset number
Select the desired preset number by pressing
PRESET +/–, then perform the procedure from
Step 3.
To listen to radio stations when
you know the frequencies
1 Press FUNCTION repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
2 Press DIRECT TUNING.
3 Press the number buttons to select the
frequencies.
4 Press .
Ti
p
• To improve reception, reorient the connected
antennas (aerials).
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1 Press TUNER MENU.
2 Press X/x repeatedly until “FM
MODE?” appears in the front panel
display.
3 Press or c.
Viewing the station name or
frequency in the front panel
display
Operating the tuner function
using the tuner menu
TUNED ST
TUNED ST
TUNED ST