Sony BDV-IT1000 Stereo System User Manual


 
73
GB
Getting Started
Step 6: Enjoying Sound
by Each Function
You can enjoy BD/DVD, TV, Set-top box/
digital satellite receiver, or VCR sound from all
the speakers in this system.
1 Press FUNCTION repeatedly until the
desired function appears in the front
panel display.
Each time you press FUNCTION, the
function changes as follows.
“BD/DVD” t “TUNER FM” t
“TUNER AM” t “TV” t “SAT/
CABLE” t “HDMI1” t “HDMI2” t
“DMPORT” t
Note
• When you use both the TV (AUDIO IN) jacks
(analog connection) and DIGITAL IN (TV) jack
(digital connection), or SAT/CABLE IN
(AUDIO) jacks (analog connection) and
DIGITAL IN (SAT/CABLE) jacks (digital
connection) at the same time, the digital
connection takes priority.
2 Press DECODING MODE repeatedly
until the decoding mode you want
appears in the front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source from the
six speakers, select the “PRO LOGIC,”
“PLII MOVIE,” or “PLII MUSIC”
decoding mode.
For details, see page 86.
Note
Depending on your TV, you may need to turn off your
TV’s speaker to enjoy surround sound of the system.
Ti
p
• When listening to MP3 files or other compressed
music using the DIGITAL MEDIA PORT adapter,
you can enhance the sound.
Press DECODING MODE repeatedly until “A.F.D.
STD” appears in the front panel display (page 86) and
set the sound mode (page 89) to “MOVIE,”
“MUSIC,” or “NEWS.”
To cancel, select other than “A.F.D. STD.”
• When using the additional surround amplifier
(optional) with the surround back speakers (optional),
you can select “PLIIx MOVIE” and “PLIIx MUSIC”
for the decoding mode (page 86).
If distortion occurs in the sound
of a connected component
You can reduce the input level for the connected
component. For details, see [Attenuate - TV]
(page 121) and [Attenuate - SAT/CABLE]
(page 121).
Function Source
“BD/DVD” Disc that is played by the
system
“TUNER FM”/
“TUNER AM”
FM/AM radio (page 92)
“TV” TV
“SAT/CABLE” Component that is
connected to the SAT/
CABLE jacks on the rear
panel (page 59)
321
654
987
0
FUNCTION
DECODING
MODE
With the cover opened.
“HDMI1”/“HDMI2” Component that is
connected to the HDMI1
or 2 jack on the rear panel
(page 59)
“DMPORT” DIGITAL MEDIA
PORT adapter (page 98)
Function Source