Filter
Top Products
Rio Advanced Digital Audio Center User’s Guide | 103
Problem: I’m having trouble using my USB keyboard and joypad that
are plugged into the Rio Advanced Digital Audio Center via a USB hub.
Troubleshooting measures:
At this time, hubs are not supported and may cause unreliable operation. Plug one
device into the front USB port, and another into rear USB Port 2. Additional
devices may be interchanged without rebooting the Rio Advanced Digital Audio
Center.
Problem: While encoding Multiple CDs, I get a message that I’ve run
out of space. What can I do?
Troubleshooting measures:
1. The out of space message on the screen should tell you whether there will be
space in the future or whether there will never be enough space.
2. In the former case you will have to wait a period of time while the internal
encoding is finished, then re-select record Multiple CDs.
3. In the later case you will have to delete existing content to free up space on
the Rio Advanced Digital Audio Center. To delete content, press the Menu
button, then navigate to Manage Playlists and Content > Delete Content.
Problem: My Rio Receiver is unable to stream music from the Rio
Advanced Digital Audio Center.
Troubleshooting measures:
1. Verify that the Rio Advanced Digital Audio Center is set to serve to a
receiver. On the Rio Advanced Digital Audio Center, press the Menu button,
then navigate to Setup menu > Network Configuration, and make sure the
option ’Serve receiver units’ is selected.
2. Verify that the Home PNA DHCP values are set on the Rio Advanced Digital
Audio Center. On the same menu as above, select the option 'Receivers…'
and ensure your DHCP settings are consistent with your Home PNA
network.
3. Check the link light on the back of the Rio Receiver.
4. Recycle the power (unplug and replug) to the Rio Advanced Digital Audio
Center and Rio Receiver. Turn both off, then turn the Rio Advanced Digital
Audio Center on first.
5. Check to make sure you have the cables plugged in correctly.
6. If the Rio Receiver still does not find the Rio Advanced Digital Audio Center,
try connecting the Receiver directly to the Rio Advanced Digital Audio
Center to rule out any issues with the wiring.