M10 Re:system
5
Installation and operation
Please check the unit and
accessories for any signs of
transit damage after unpacking.
Read the operation manual
through carefully before starting
to use the unit. Keep the manual
for later reference.
A unit that shows signs of
mechanical damage or which has
had liquid in it may not be
connected to the mains supply.
Use the supplied mains cable.
The unit’s power supply and
connections values (mains
voltage, frequency) must be
checked before connecting it to
the mains. Fuses used in the
device must comply with the
factory definitions in the
“Technical Data” section.
Safety measures
Unusual operation
Unplug the unit from the mains
immediately in the event of any
unusual noises or odours. Have
the unit checked by your dealer
without delay.
Do not open the unit
The unit may not be opened as
there is a risk of electrification.
Non-use of the unit
If the unit is not going to be used
for a longer period of time, the
power cable should be removed
from the power socket for
reasons of safety.
Foreign objects
Liquids, flammable or other
objects should not be inserted in
the unit’s openings as this can
lead to faults, fire or an electrical
shock.
Power cable
Never pull on the cable when
plugging the unit in or out. Always
hold the plug.
Splash water
Do not expose the device to splash
water or high levels of humidity.
Do not stand containers filled with
liquid, e.g. flower vases, on the
device.