Filter
Top Products
M10 Re:system
36
Software version
The Version function displays the
current version number for each
module along with the plug-in slot
that it occupies.
Select the Version softkey in the
Setup main menu.
You can toggle between the two
Version pages with the Version
softkey.
The lefthand column shows the
module plug-in slot with the
numbers 1 – 7 and 8 – 10.
The plug-in slots 11 – 15 are
reserved for internal and external
M10 modules.
The middle column defines each
module, the development
generation of this module and
whether it is bootloader enabled.
+ : bootloader enabled
- : not bootloader enabled
The righthand column shows the
software version of the corres-
ponding module.
Non-occupied plug-in slots are
identified by Not used.
Example:
5 MRT+3 2.00
This line defines that the 3
rd
generation Multiroom module with
the software version 2.00 is
located in slot 5.
This module can receive a
software update using the
bootloader
+.
You will find more information on
the Bootloader topic in the M-
Scope operating manual.